|
聯系方式
加關注0
上海安楷電子科技有限公司企業會員第16年
資料未認證
保證金未繳納
|
||||||||||||||||||||||||
CCPAM
CCPAM5000 屬于多線傳輸設備，對稱速率可以達到 5.69 Mbps/2線, 11.38Mbps/4線, 和 22.76Mbps/8線 。支持EFM Bounding，在使用8線模式時，當其中任意線故障，都不會影響其他線路
CCPAM5000 是一個非常理想的LAN擴展和互聯網接入產品.它可應用在商業和ISP 和IPTV 等服商.它可靈活在應用在諸如WEB 主機,視頻會議,上下行對稱速率要求的場所,在當今寬帶商業環境中顯露其獨特的特點.同時CCPAM5000 擁有完善的客戶界面，可以支持TELNET, Web GUI,等
Standard Compliance
Protocol
ITU-T G.991.2
Transmission rate up to 5.69 Mbps on 2-wire
Transmission rate up to 11.38 Mbps on 4-wire
Transmission rate up to 22.76 Mbps on 8-wire
Support of Annex A, Annex B, Annex F, and Annex G
Auto load balancing with bonded pairs
support point-to-point configuration
Support ATM over G.SHDSL.bis and G.SHDSL MAC bridging(IEEE 802.3ah and 802.1D)
PPPoE (RFC 2416)
RFC 1483/2684 Bridged encapsulation (routing mode optional)
IP support TCP, RIPv1, RIPv2, UDP, ICMP, ARP
IEEE802.1P Priority Output Queuing
IEEE 802.1Q VLAN
IEEE802.3u Fast Ethernet 100BaseT
MAC Filtering
QoS support VBR-rt, VBR-nrt, CBR and UBR
Support 8 PVCs
NAT/PAT support
DHCP client/server and DHCP relay functionality
VPN pass-through IPSec and L2TP
Support IGMP Snooping
DMZ support
Support Port-based VLAN
Maintenance
Firmware upgradeable via FTP or HTTP
Support Telnet
Support ATM OAM F5 End to End and Segment loopbacks
Statistics on DSL link and data ports
Sys-log
anagement
LED
Password protection
PAP and CHAP support
Remote access management via telnet
SNMPv1, v2c
Firewall Security
Packet Filter
Denial of Service
Stateful Packet Inspection (SPI)
Attack Alert and log
Access Control
Real time log
MIB-II (RFC 1213, RFC 1573)
Web based GUI interface
Command Line Interface (CLI)
LED indicator; power, DSL links, Alarm, Ethernet ports and CO/CPE mode
Hardware Interface
DSL interface: 2/4 wires one RJ-11 jack. 8 wires two RJ-11 jack
Ethernet interface: four RJ-45 jack; 10/100BaseT auto sensing and crossover
AC power adapter (100VAC ~ 240VAC, 50-60Hz)
One craft Interface for local console access (CID)
Dimensions & Weight
Dimensions: 35mm(H)×210mm(W)×193mm(D)
Weight: 914g
Operating Requirements
Operating temperature: 0C to +50C
Operating humidity: 5% to 90% RH non-condensing
